Headset

Articles - Category Page

  • Cloud Orbit headset USB battery charging

    There are several reasons the Orbit headset battery might not be charging while connected with the USB cable: The USB port the headset is plugged into may not be supplying enough power. This may happen if you are using a USB hub or laptop USB port Some USB ports do not supply power when in a power s

    Knowledge Base Article

  • Cloud Alpha 2 Wireless - Controls - Status LED

    Status Adapter Mode Dual Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking purple Connected Solid-fade white for 5 seconds Solid-fade purple for 5 seconds

    Knowledge Base Article

  • Cloud II Specifications

    Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

    Knowledge Base Article

  • HyperX Cloud Stinger Core Wireless + 7.1 Setup and Controls

    Using the Headset Swivel to Mute Microphone Power Button Power on/off – Hold the power button for 3 seconds. Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time

    Knowledge Base Article

  • Cloud Orbit Software User Manual

    Cloud Orbit Software User Manual

    Knowledge Base Article

  • Cloud Core Wireless DTS Playstation 5

    1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H

    Knowledge Base Article

  • Cloud Jet Setup

    Windows 11 To ensure the headset is configured correctly on the PC, follow the steps below: 1. Right-click on the sound icon in the system tray and select Sound Settings. 2. Set the output device to Headphones [HyperX Cloud Jet]. 3. Set the input device to Microphone [HyperX Cloud Jet]. PlayStation

    Knowledge Base Article

  • Cloud II Usage Direct Connect without Control Box

    Usage (Direct Connect) with No Control Box Connect your headset directly to your computer, game console, or another device (phone or tablet) that has a 3.5mm audio jack.

    Knowledge Base Article

  • Cloud MIX 2 Using the Multifunction Button

    Cloud MIX 2 Using the Multifunction Button Using the [ Multifunction ] button, the following media controls are available when using Bluetooth® or the Ultra-Low Latency USB dongle: Using the [ Multifunction ] button, the following phone controls are available when using Bluetooth®: Note: Button func

    Knowledge Base Article

  • Cloud Revolver Overview

    Cloud Revolver Overview ​ A. Durable Steel Frame B. Suspension Headband C. Detachable Noise Cancellation Mic D. Attached Cable w/ 4 Pole 3.5mm Plug E. Audio Control Box with 3.5mm Stereo and Mic Plugs (2m)

    Knowledge Base Article