Centro de soporte de HyperX
Artículos de la base de conocimientos
Artículos de la base de conocimientos
Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz (earphones) Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB T.H.D: < 2% Power handling capacity: 150mW • Sound coupling to the ear: Circumaural Ambient noise attenuati
Artículo de la base de conocimientos
•
Cloud
Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud II headset with a mobile device, unplug the USB control box and plug the 3.5mm headset jack directly into the audio jack on your phone or tablet.
Artículo de la base de conocimientos
•
Cloud II
Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge cable (0.5m) Microphone Element: Electret c
Artículo de la base de conocimientos
•
Cloud II Wireless DTS
Usage Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.
Artículo de la base de conocimientos
•
Cloud III Wireless
Cloud Mini Wireless Charging It is recommended to fully charge the Headset before the first use. The headset will take approximately 2.5 hours to fully charge from low battery.
Artículo de la base de conocimientos
•
Cloud Mini Wireless
Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), unplug the headset jack from the USB control box and connect audio jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3.
Artículo de la base de conocimientos
•
Cloud II
Usage (Direct Connect) with No Control Box Connect your headset directly to your computer, game console, or another device (phone or tablet) that has a 3.5mm audio jack.
Artículo de la base de conocimientos
•
Cloud II
Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He
Artículo de la base de conocimientos
•
Cloud III S Wireless