Headset

Cloud Stinger Wireless Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2.

A. Mic mute / monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port/ internal microphone F. Multifunction button G. Volume wheel H. Wireless mode switch I. Removable earcup plates J. Customizable RGB lighting K. Detachable microphone L. Microphone mute LED M. USB wi

Scroll up or down to adjust the volume wheel

Fully Charged - Solid Green 61% - 99% - Breathing Green 21% - 60% - Breathing Yellow < 20% - Breathing Red

Connecting the CloudX Flight 2 via Bluetooth Slide the wireless mode switch to Bluetooth mode. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search, and connect to “HyperX CloudX Flight 2 Wireless”.

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade Green 21% to 60% Solid-fade Yellow 10% to 2

HYPERX CLOUD FLIGHT HEADSET – HSCFFirmware Update Rev. 3116/4103 Part Numbers: HX-HSCF-BK Description: This firmware update contains two different sets of firmware: Rev. 3116 for build AxxLF/BxxLF and Rev. 4103 for CxxLF. The updater will automatically flash the correct firmware based on the build o

Cloud Orbit S Specifications Headphone Driver: Planar transducer, 100 mm Type: Circumaural, Closed back Frequency response: 10Hz–50,000Hz Sound pressure level: >120 dB T.H.D.: < 0.1% (1 kHz, 1 mW) Weight: 368g Modes Orbit: 3D audio Orbit S: 3D audio with head tracking Cable length USB Type-C to USB

Right-click on the sound icon in the system tray and select Sound Settings. Set the output default device to Headphones [HyperX Cloud Alpha 2 Wireless Game]. Set the output default communications device to Headphone [HyperX Cloud Alpha 2 Wireless Chat]. Set the input device to Microphone [HyperX Clo

Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma