Headset

Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Setting up with PlayStation 4 1. Set Input Device to USB Headset (HyperX Cloud Flight S) 2. Set Output Device to USB Headset (HyperX Cloud Flight S) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to the maximum.

Battery Level Status - Press Power Button to check the battery level The Status LED will automatically turn off to conserve battery life. 61%-100% - Solid-fade Green 21%-60% - Solid-fade Yellow 10%-20% - Solid-fade Red

Overview ​ A. Durable Steel Frame B. Suspension Headband C. Detachable Noise Cancellation Mic D. Attached cable with 4 pole 3.5mm Plug E. USB Audio Control Box

Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2. Plug the USB wireless a

It is recommended to fully charge your headset before first use.

Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi mode. With the headset in Adapter mode, hold down the power but

Go to the home page and select Settings > Sound. For the microphone, set the Input Device to USB Headset "HyperX Cloud Flight 2 Wireless". For audio output, set the Output Device to USB Headset "HyperX Cloud Flight 2 Wireless". Additionally, set Output to Headphones to "All Audio".

Cloud Flight PC, PS4™ or Mac® Usage Connect the wireless adapter to a USB port on your PC, PS4 or Mac. (The wireless adapter status light will blink.) Power on the headset. When the wireless adapter status light is solid the headset is connected. Note: If it is your first time using the headset you

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Qi wireless charging To charge the headset via Qi wireless, place the left earcup onto a Qi wireless charging base. Wired c