Headset

Cloud II Wireless Quick Start Guide

Use cable to connect the headset and devices directly with 3.5mm jacks.

Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

HyperX Cloud Stinger 3 PS Overview A. Gaming Headset

Overview ​ A. Swivel to Mute Microphone B. Status LED C. Power Button D. Volume Wheel E. USB Charge Port F. USB Adapter G. Wireless Pairing Pin Hole H. Wireless Status LED I. USB Charge Cable

Cloud Alpha 2 Wireless - Firmware v124 Change log Resolved an issue where devices failed to communicate properly with NGENUITY after resuming from sleep mode. Fixed a bug where lighting settings were not being saved on DAC keys. Addressed issue where Bluetooth functionality could fail when charging

Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

Using the Headset Swivel to Mute Microphone Power Button Power on/off – Hold the power button for 3 seconds. Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time

Plug the 3.5mm jack into the system (PC, controller).

Power Button Hold down for 3 seconds > Power on headset Hold down for 5 seconds > Power off headset Press once > Play/pause audio Microphone Mute Move switch up > Disable microphone mute Move switch down > Enable microphone mute Microphone volume wheel Scroll > Adjust microphone volume level Short p