耳機

1. Slide the headset wireless mode switch to the WiFi symbol and the base station mode switch to "HEADSET". 2. Power ON the headset.

Overview A. Status LED B. Power Button C. Mic Mute / Mic Monitoring Button D. USB-C Charge Port E. Microphone Port F. Volume Wheel G. Detachable Microphone H. Microphone Mute LED I. USB Adapter J. Wireless Status LED K. Wireless Pairing Pin Hole L. USB Charge Cable

Mic mute toggle: Press button to turn the mic mute on / off. Mic monitoring toggle: Hold button for 2 seconds to toggle mic monitoring on / off.

Cloud II 無線（PC）設定 1. 將無線 USB 轉接器連接到電腦。 2. 打開耳機電源。 3. 右鍵點選揚聲器圖示 > 選擇“開啟聲音設定” > 選擇“聲音控制面板” 4. 在播放標籤下，點選“HyperX Cloud II Wireless”，然後點選“設定為預設值”按鈕。 5. 右鍵點選“HyperX Cloud II Wireless”，然後按一下“設定揚聲器”。 6. 選擇 7.1 環繞聲作為揚聲器配置，然後按一下下一步。 7. 在“錄製”標籤下，點選“HyperX Cloud II Wireless”，然後點選“設定為預設值”按鈕。 8. 在「播放」標籤下，確認「Hyper

Cloud III Wireless Quick Start Guide

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Alpha Wireless” and click on the Set Default button. 5. Under the Recordi

Cloud II Core Wireless Volume Wheel Scroll up and down to adjust the volume level WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Wired Charging: To charge the headset via wired, plug the headset to a USB port with the USB charge cable.

HYPERX CLOUD II HEADSET - Kingston/KTC Firmware Update Rev. 0010 Part Number: KHX-HSCP-xx Description: We have improved the firmware for the HyperX Cloud II USB sound card to enable PS4 compatibility. For information related to the Firmware improvements, please see the "Release Notes” located below.

Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma