耳機

Headphone Driver: Dynamic, 50mm with Neodymium magnets Form factor: Closed Back Frequency response: 10 Hz - 20.2 kHz Impedance: 32 Ω Sensitivity: 104.5 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Memory foam and premium leatherette Microphone Element: Electret condenser micropho

Mic mute toggle: Press button to turn the mic mute on / off. Mic monitoring toggle: Hold button for 2 seconds to toggle mic monitoring on / off.

Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

A. Swivel-To-Mute Microphone B. Status LED C. Power Button D. USB-C Charge Port E. Multifunciton Button F. Volume Wheel / Headset Chat Mix G. Wireless Mode Switch H. USB Wireless Dongle I. USB Dongle Mode Switch J. Dongle Status LED K. Pairing Pin Hole L. USB-C to USB-A Adapter M. USB-C Charge Cable

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PC, follow the steps below. Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Speake

Microphone Down Position - Microphone Mute Off Microphone Up Position - Microphone Mute On

Cloud Stinger Wireless Headset Battery Indicator LED States The headset battery indicator LED indicates the current state of the headset.

Charging It is recommended to fully charge your headset before first use.

簡而言之：如果您的無線網路卡在 PS5 或其他系統上無法運作，但在其他裝置上卻可以正常運作，請使用外接電源的 USB 集線器。必須是外接電源的集線器。如果仍然遇到問題，請聯絡我們。 護理團隊。 如果您有一款無線產品（特別是耳機），它會透過無線 USB 轉接器連接，並且您嘗試將其與 PS5 一起使用，您可能會遇到 PS5 似乎無法識別 USB 的問題。 將USB轉接器插入PS5後，轉接器上的LED指示燈應該會亮起。如果指示燈不亮，則表示適配器無法正常運作。 然而，這可能並非加密狗本身的問題。主機端最近對USB介面的改變可能導致USB介面供電過高，進而導致USB加密狗進入安全模式。部分主機型號僅在

按下麥克風靜音按鈕即可開啟/關閉麥克風靜音功能： LED 指示燈亮起：麥克風已靜音 LED 燈熄滅：麥克風已激活