耳機

Status Adapter Mode Bluetooth Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking blue Connected Solid-fade white for 5 seconds Solid-fade blue for 5 seconds

Using with PC, Chromebook, or Notebook ​

Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge cable (0.5m) Microphone Element: Electret c

Status LED Status Adapter Mode Bluetooth Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking blue Connected Solid-fade white for 5 seconds Solid-fade blue for 5 seconds Power Button Power on / off - Hold button for 2 seconds to power headset on / off. Battery level

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

CloudX Stinger Core Wireless Quick Start Guide

HyperX Cloud III S Wireless User Manual

使用方法（PlayStation 4） 若要將耳機與 PlayStation® 4 (PS4™) 搭配使用，請將耳機上的 3.5 公釐插頭直接連接至 PS4 遊戲控制器，然後依照下列步驟操作： 1. 打開你的PS4遊戲機。 2. 進入設定選單並選擇它。 3. 選取“設備”選單選項。 4. 向下捲動到「音訊設備」並選擇它。 5. 選擇“輸出到耳機”，然後選擇“所有音訊”。

Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox