耳機

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Usage with HP OMEN System 1. Power on the HP OMEN system 2. Power on the headset. The headset will automatically connect to the system.

Microphone down position - Mic On Microphone up position - Mic Off

Usage (Xbox® One) To use the HyperX Cloud headset with Xbox® One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox® One controller (pictured below.) Because this adapter has built-in volume controls, you can remove the control box that came with your HyperX Cloud headset

Cloud Stinger Core Overview A. Headaband Adjustment Slider B. Rotating Noise Cancellation Mic C. In-Line Audio Control

Setup The headset features a detachable cable and detachable microphone. To connect the detachable headset cable, locate the end with the headphone icon label and plug the cable into the female jack on the left headset ear cup. The plug and ear cup female jack both have a grey color for easy identif

Cloud Stinger Microphone mute operation The headset left ear cup contains a swivel-to-mute microphone. To mute the microphone, rotate the microphone to the vertical (up) position. When you hear a click, the microphone will be muted. To activate the microphone, rotate the microphone to the horizontal

Wireless Dongle Method 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. While the wireless dongle is plugged in, use a small tool to hold down the pairing button inside the pin hole until the dongle LED starts blinking rapidly. The

將耳機模式開關設定為轉接器模式（WiFi 符號）。 在耳關機狀態下，按住多功能按鈕，直到耳機指示燈開始快速紅綠交替閃爍。此時耳機已進入配對模式。 將USB無線網卡插入電腦後，使用小工具（例如回形針、SIM卡托彈出器等）按住針孔內的按鈕，直到網卡狀態指示燈快速閃爍。此時USB無線網路卡已進入配對模式。 等待耳機指示燈和USB無線轉接器指示燈都常亮為止。 耳機和USB無線適配器現在應該已經配對成功。

耳機充電 當耳機透過 USB 充電線連接到充電器時，狀態指示燈會顯示充電狀態。耳機充滿電大約需要 3 小時。 狀態指示燈 耳機上的狀態指示燈顯示耳機的目前狀態。

麥克風靜音按鈕 3.5毫米耳機插孔 麥克風介面 音量輪 可拆式麥克風 麥克風靜音指示燈 3.5mm 電腦延長線 USB加密狗 USB-C 轉 USB-A 轉接器 可拆卸式 3.5 毫米電纜（5 極轉 4 極）