耳機

Cloud Stinger 2 Overview ​ A. Gaming Headset B. PC Splitter Cable C. DTS Headphone: X Instruction Card

Cloud Stinger Core 7.1 Audio Control Features Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time Swivel to Mute Microphone ​

Cloud Flight PC, PS4™ or Mac® Usage Connect the wireless adapter to a USB port on your PC, PS4 or Mac. (The wireless adapter status light will blink.) Power on the headset. When the wireless adapter status light is solid the headset is connected. Note: If it is your first time using the headset you

Plug the headset into the controller using the 3.5mm jack

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. Set Input Device to USB Headset (HyperX Cloud III S Wireless). Set Output Device to USB Headset (HyperX Cloud III S Wireless). Set Output to Headphones to All Audio. Set Volume Control (He

CloudX Flight Headset Status Beep Tone Indicators The headset will emit beep tones to indicate status for power, volume, game/chat balance, microphone mute, mic monitoring, and battery charge.

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Cloud Stinger Wireless Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2.

Cloud Stinger Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz-20,000Hz Impedance: 32 Ohm Sound pressure level: 109dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 270g Cable length and type: USB charging cable (1m) Microphon

Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length