耳機

A. Status LED B. Power button C. Mic mute / monitoring button D. 3.5mm headset jack E. USB-C charge port F. Microphone poort G. Wireless mode switch H. Multifunction button I. Volume wheel J. Base station K. Base station USB-C port L. 3.5mm line out port M. 3.5mm line in port N. Detachable microphon

滾動音量滾輪即可調高/調低音量。 警告：長時間以高音量使用耳機可能會造成永久性聽力損傷。

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

Pairing to HP OMEN USB dongle 1. Open NGENUITY. 2. Plug in the optional, external USB dongle which came with the headset. 3. If USB wireless dongle is plugged into supported HP OMEN system, NGENUITY will prompt user if they want to pair the headset to the dongle or continue to use direct system conn

Cloud Orbit 軟體使用手冊

Go to the home page and select Settings > Sound Microphone •Input Device: USB Headset “HyperX Cloud Stinger 3 Wireless” Audio Output •Output Device: USB Headset “HyperX Cloud Stinger 3 Wireless” •Output to Headphones: All Audio

Setting up with PlayStation 5 Go to the home page and select Settings > Sound Microphone Input Device: USB Headset “HyperX Cloud III Wireless” Audio Output Output Device: USB Headset “HyperX Cloud III Wireless” Output to Headphones: All Audio Under volume, set headphones slider to maximum level

Usage (with Control Box) Connect your headset to the control box that has both a headset jack and a microphone jack on it. The headset jack (green stripes) plugs into the green input port on the control box and the microphone jack (pink stripes) plugs into the pink input port on the control box. The

Microphone Down Position - Microphone Mute Off Microphone Up Position - Microphone Mute On

Cloud Jet 概覽 A. 旋轉靜音麥克風 B. 狀態指示燈 C. 模式切換 D. 音量輪 E. USB-C 充電埠 F. 多功能按鈕 G. USB無線轉接器 H. 配對針孔 I. USB-C 轉 USB-A 充電線