耳机

1. Slide the headset wireless mode switch to the WiFi symbol and the base station mode switch to "HEADSET". 2. Power ON the headset.

Overview A. Status LED B. Power Button C. Mic Mute / Mic Monitoring Button D. USB-C Charge Port E. Microphone Port F. Volume Wheel G. Detachable Microphone H. Microphone Mute LED I. USB Adapter J. Wireless Status LED K. Wireless Pairing Pin Hole L. USB Charge Cable

Mic mute toggle: Press button to turn the mic mute on / off. Mic monitoring toggle: Hold button for 2 seconds to toggle mic monitoring on / off.

Cloud II 无线（PC）设置 1. 将无线 USB 适配器连接到电脑。 2. 打开耳机电源。 3. 右键单击扬声器图标 > 选择“打开声音设置” > 选择“声音控制面板” 4. 在播放选项卡下，点击“HyperX Cloud II Wireless”，然后点击“设置为默认值”按钮。 5. 右键单击“HyperX Cloud II Wireless”，然后单击“配置扬声器”。 6. 选择 7.1 环绕声作为扬声器配置，然后单击下一步。 7. 在“录制”选项卡下，点击“HyperX Cloud II Wireless”，然后点击“设置为默认值”按钮。 8. 在“播放”选项卡下，确认“Hype

Cloud III Wireless Quick Start Guide

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Alpha Wireless” and click on the Set Default button. 5. Under the Recordi

Cloud II Core Wireless Volume Wheel Scroll up and down to adjust the volume level WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Wired Charging: To charge the headset via wired, plug the headset to a USB port with the USB charge cable.

HYPERX CLOUD II HEADSET - Kingston/KTC Firmware Update Rev. 0010 Part Number: KHX-HSCP-xx Description: We have improved the firmware for the HyperX Cloud II USB sound card to enable PS4 compatibility. For information related to the Firmware improvements, please see the "Release Notes” located below.

Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma