Cloud Family

手动配对耳机和 USB 适配器 耳机和USB适配器出厂时已自动配对。但如果需要手动配对，请按照以下步骤将耳机和USB适配器配对。 1. 在耳机关机状态下，按住电源按钮，直到耳机状态指示灯开始快速红绿交替闪烁。此时耳机已进入配对模式。 2. 插入 USB 适配器后，使用小工具（例如回形针、SIM 卡托弹出器等）按住针孔内的按钮，直到 USB 适配器上的 LED 指示灯快速闪烁。此时 USB 适配器处于配对模式。 3. 等待耳机指示灯和 USB 适配器指示灯都常亮。耳机和 USB 适配器现已配对成功。

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

Cloud II 无线（PC）设置 1. 将无线 USB 适配器连接到电脑。 2. 打开耳机电源。 3. 右键单击扬声器图标 > 选择“打开声音设置” > 选择“声音控制面板” 4. 在播放选项卡下，点击“HyperX Cloud II Wireless”，然后点击“设置为默认值”按钮。 5. 右键单击“HyperX Cloud II Wireless”，然后单击“配置扬声器”。 6. 选择 7.1 环绕声作为扬声器配置，然后单击下一步。 7. 在“录制”选项卡下，点击“HyperX Cloud II Wireless”，然后点击“设置为默认值”按钮。 8. 在“播放”选项卡下，确认“Hype

Cloud II Core Wireless Quick Start Guide

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Usage with HP OMEN System 1. Power on the HP OMEN system 2. Power on the headset. The headset will automatically connect to the system.

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. ​

Cloud II Core Wireless Setting up with PlayStation 5 1. Connect the wireless dongle to your device. 2. Power on the headset 3. Go to the home page and select Settings > Sound 4. Microphone: Input Device: USB Headset "HyperX Cloud II Core Wireless" 5. Audio Output: Output Device: USB Headset "HyperX

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc

Cloud II 无线快速入门指南