耳机

Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Microphone Element: Electret condenser micro

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: Audio Tab Basic volume controls Audio equalizer Mic presets Mic effects Spatial Audio Tab Basic spatial audio controls Advanced setting Lights tab Global lights controls Effects library Keys tab *Note: S

Slide the wireless mode switch to the Bluetooth symbol. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search and connect to "HyperX CloudX Stinger 3 Wireless".

Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox One™ controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox On

适配器模式 1. 将模式开关滑到无线模式。 2. 将 USB 无线适配器连接到 PC 或游戏机。 3. 打开耳机电源。 蓝牙模式 1. 将模式开关滑动到蓝牙模式。首次设置时，耳机指示灯会闪烁蓝光。 2. 打开设备的蓝牙设置，搜索并连接“HyperX Cloud Jet”。 蓝牙配对 1. 将模式开关滑动到蓝牙模式。电源 离开 耳机。 2. 按住多功能按钮 5 秒钟。LED 指示灯呈快速 蓝色闪烁时，表示已进入配对模式。 语音提示说：“正在配对蓝牙”。 3. 进入设备的蓝牙设置并连接到“HyperX Cloud Jet“

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

HYPERX CLOUD VIRTUAL 7.1 SURROUND SOUND – USCCPSS Firmware Update Rev. 0010 Part Numbers: HX-USCCPSS-BK HX-HSCC-2-BK Description: This firmware update improves compatibility for the Cloud Virtual 7.1 Surround Sound USB audio adapter on console systems. This update can also be used on the USB audio a

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

Volume Wheel - Scroll up or down to adjust volume level

Cloud Alpha 2 Wireless - Firmware v124 Change log Resolved an issue where devices failed to communicate properly with NGENUITY after resuming from sleep mode. Fixed a bug where lighting settings were not being saved on DAC keys. Addressed issue where Bluetooth functionality could fail when charging