耳机

给耳机充电 连接充电线后，LED 指示灯会显示充电状态。 状态指示灯 LED指示灯常亮红色 > 正在充电 LED灯熄灭 > 已充满电 当电量剩余 15% 时，会播放“电量低”语音提示。 要禁用 USB 充电，请按住耳机音量旋钮 2 秒钟。

Cloud MIX 2 手动配对 USB 适配器 1. 将 USB 适配器插入支持设备。 2. 确保耳机已关机，然后按住[电源]按钮10秒钟。耳机状态指示灯将开始快速闪烁白光。 3. 按住 USB 适配器按钮 10 秒钟，直到 USB 状态指示灯开始快速闪烁白光。配对成功后，两个指示灯将变为常亮白光，然后恢复正常工作状态。

使用 Ngenuity 应用程序 这里前往耳机面板，点击电池图标。您可以设置不同的时间间隔，也可以完全禁用此功能。

Manually Pairing the Headset and USB Adapter While the headset is powered off, hold down the power button until the headset earcup LEDs starts blinking rapidly. The headset is now in pairing mode. While the USB adapter is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold

Although Cloud Flight S is compatible with PS4, the chat mixer feature is only supported on PC.

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade Green 21% to 60% Solid-fade Yellow 10% to 2

HYPERX CLOUD FLIGHT HEADSET – HSCFFirmware Update Rev. 3116/4103 Part Numbers: HX-HSCF-BK Description: This firmware update contains two different sets of firmware: Rev. 3116 for build AxxLF/BxxLF and Rev. 4103 for CxxLF. The updater will automatically flash the correct firmware based on the build o

Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Headphones (HyperX Cloud Flight 2 Wireless). Set the input device to Microphone (HyperX Cloud Flight 2 Wireless).

Connecting the CloudX Flight 2 with PC Slide the headset wireless mode switch to adapter mode Connect the USB wireless dongle to your device Power ON the headset

Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow