耳机

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20

Cloud II Core Wireless Setting up with PlayStation 5 1. Connect the wireless dongle to your device. 2. Power on the headset 3. Go to the home page and select Settings > Sound 4. Microphone: Input Device: USB Headset "HyperX Cloud II Core Wireless" 5. Audio Output: Output Device: USB Headset "HyperX

Cloud MIX 2 使用 3.5 毫米连接 使用有线连接时，耳机需要供电才能进行降噪。 注意：有线连接不支持麦克风音频。

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

Connecting the CloudX Flight 2 with Xbox console Slide the headset wireless mode switch to adapter mode and slide the dongle mode switch to Xbox mode Connect the USB wireless dongle using the USB-C to USB-A adapter Power ON the headset

Cloud MIX 2 充电 建议首次使用前将耳机充满电。 充电时，电源状态指示灯会显示耳机的电池电量。电量低时，充电 10 分钟即可获得长达 6 小时的播放时间。

Cloud Core 7.1 Overview A. Gaming Headset B. Detachable microphone C. USB Sound Card D. Microphone Mute E. 7.1 Virtual Surround Sound F. Headphone Volume G. Microphone Volume

HYPERX CLOUD FLIGHT HEADSET – HSCFFirmware Update Rev. 3116/4103 Part Numbers: HX-HSCF-BK Description: This firmware update contains two different sets of firmware: Rev. 3116 for build AxxLF/BxxLF and Rev. 4103 for CxxLF. The updater will automatically flash the correct firmware based on the build o

Right-click on the sound icon in the system tray and select Sound Settings. Set the output default device to Headphones [HyperX Cloud Alpha 2 Wireless Game]. Set the output default communications device to Headphone [HyperX Cloud Alpha 2 Wireless Chat]. Set the input device to Microphone [HyperX Clo

1. Connect the wireless adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone, set the following: Input Device: USB Headset (HyperX Cloud Stinger 2 Wireless) 4. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Stin