Cloud III Series

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Status LED Status Adapter Mode Bluetooth Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking blue Connected Solid-fade white for 5 seconds Solid-fade blue for 5 seconds Power Button Power on / off - Hold button for 2 seconds to power headset on / off. Battery level

Status LED ​

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

Performing a factory reset on the headset will reset the headset to default settings, remove pairing info with paired Bluetooth devices, and remove pairing info with OMEN Instant Pair. Press and hold the Power button and Multi-function button for 10 seconds to initiate factory reset. The power statu

It is recommended to fully charge your headset before first use. To charge the headset, plug the headset to a USB port with the included USB-C charge cable. When charging the headset, the headset status LED will indicate the current charge status. Charge Status Status LED Fully Charged Solid green 6

Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status – Press the button to see the battery level status on the status LED. The status LED will automatically turn off to conserve battery life.

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. ​

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo