Cloud Family

1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

Cloud User Manual

Usage (PlayStation® 4) To use the HyperX Cloud Core headset with PlayStation 4 (PS4™), connect the 3.5mm jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4 game console. 2. Navigate to the Settings menu and select it. 3. Highlight the ‘Devices’ menu o

요약: 무선 동글이 PS5 또는 다른 기기에서 작동하지 않지만 다른 기기에서는 정상적으로 작동하는 경우, 외부 전원 공급 방식의 USB 허브를 사용해 보세요. 반드시 외부 전원 공급 방식의 허브여야 합니다. 그래도 문제가 해결되지 않으면 고객 지원팀에 문의해 주세요. 케어팀. 무선 USB 동글을 사용하는 무선 제품(특히 헤드셋)을 PS5에 연결하여 사용하려고 할 때, PS5가 USB를 인식하지 못하는 문제가 발생할 수 있습니다. USB 동글을 PS5에 연결하면 USB 동글의 LED 표시등에 불이 들어와야 합니다. 불이 들어오지 않으

Cloud II Wireless DTS LED indicator ​ Charging headsets

Xbox One™ or PS4™ ​ Connecting the Cloud Core 7.1 to consoles

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20

Cloud Usage (Correct vs Incorrect) When connecting your HyperX Cloud headset to a device that has a single 3.5mm audio jack, you MUST use the splitter cable (or “Y” cable) to ensure that each jack is connected properly and securely plugged in. Do NOT ignore or leave any audio jacks unplugged as depi

Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e