Cloud Family

A. Mic mute/mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Volume wheel G. Detachable microphone H. Microphone mute LED I. USB wireless dongle J. Dongle status LED K. Pairing pin hole L. USB-C to USB-A adapter M. USB charge cable

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: DTS Headphone:X Adjustable EQ settings Adjustable auto shut-off behavior Battery level indicator

Cloud III Wireless Quick Start Guide

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. Set Input Device to USB Headset (HyperX Cloud III S Wireless). Set Output Device to USB Headset (HyperX Cloud III S Wireless). Set Output to Headphones to All Audio. Set Volume Control (He

In NGENUITY software, the headset can be set to prioritize voice notifications or tone notifications. If voice prompts are set to off, the headset will switch to tones for the following notifications: Power on / off Adapter connected / disconnected Bluetooth connected / disconnected Volume at minimu

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

HYPERX CLOUD II HEADSET - Kingston/KTC Firmware Update Rev. 0010 Part Number: KHX-HSCP-xx Description: We have improved the firmware for the HyperX Cloud II USB sound card to enable PS4 compatibility. For information related to the Firmware improvements, please see the "Release Notes” located below.

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status - Press the button to see the battery level status on the status LED. *The status LED will automatically turn off to conserve battery life. *Battery level indication