QuadCast Family

QuadCast 2 S can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads. ​

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​ LED Indicators Microphone On - Headset Off = Adjust Microphone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Headset On = Adjust Microphone Monitoring Level

A. Tap-to-mute sensor B. Gain control knob C. Polar pattern knob D. Headphone jack E. USB-C port F. USB cable G. Mount adapter* *Supports both 3/8” and 5/8” thread sizes

QuadCast 2 S Quick Start Guide

HyperX Quadcast 2 User Manual

You can use a USB C to USB C cable but it will only work with one orientation of the USB C connection (on the microphone side). This does not affect the USB C to USB A cable included with the microphone.

​ Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter

Hold the volume knob down for 2 seconds to change the polar pattern