Microfono

Connect directly to computer's USB ports to use microphone.

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

When the microphone is not muted and no level adjustements are being made, the LED bar will show the microphone's level meter. Press the multifunction wheel to cycle between adjustment modes. Microphone Gain Headphone Volume * Monitor/Playback Mix* *USB connection only. 3.5mm connection required for

Manuale utente di HyperX SoloCast 2

Why doesn’t QuadCast 2 S work with Sony PlayStation or Nintendo Switch? The QuadCast 2 S leverages USB Audio Class 2 (UAC-2) technology to deliver audio quality, supporting bit depths beyond 24-bit and sampling rates above 96 kHz. Unlike its predecessor, UAC-1, UAC-2 also accommodates additional aud

Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​ LED Indicators Microphone On - Headset Off = Adjust Microphone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Headset On = Adjust Microphone Monitoring Level

​​ Premere il pulsante multifunzione per passare da uno dei due modelli polari del microfono, indicati dall'anello LED. Anello LED - Da tutto il fronte - Cardioide Anello LED frontale a tutto tondo - Omnidirezionale

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open