Quadcast 2 Series

Hold and turn gently to remove or attach microphone to the shock mount.

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

QuadCast 2 should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

*HyperX Cloud III Wired Not Included ​

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (NOT include the top LED ring) will flash when the factory reset has been triggered.

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

QuadCast 2 Connecting Headphones *HyperX Cloud III Wired Not Included ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

Hold and turn the microphone gently to remove or attach microphone to the shock mount.