Headset

Tidak disarankan menggunakan amplifier dengan headset Orbit karena tegangan level saluran standar tidak boleh dilampaui. Jika amplifier mengeluarkan tegangan lebih tinggi dari level saluran, headset dapat mengalami distorsi atau kerusakan.

Mengisi daya headset Saat kabel pengisi daya terhubung, LED akan menunjukkan statusnya. LED Status LED merah menyala > Sedang mengisi daya LED mati > Terisi penuh Pesan suara "Baterai lemah" akan berbunyi saat baterai tinggal 15%. Untuk menonaktifkan pengisian daya USB, tekan dan tahan roda volume h

Cara Memasangkan Adaptor USB Cloud MIX 2 Secara Manual 1. Colokkan Adaptor USB ke perangkat yang mendukungnya. 2. Pastikan headset dalam keadaan mati, lalu tekan dan tahan tombol [Power] selama 10 detik. LED status headset akan mulai berkedip putih dengan cepat. 3. Tekan dan tahan tombol adaptor USB

Menggunakan Aplikasi Ngenuity dari Di Sini, buka panel headset dan klik ikon baterai. Ada beberapa pilihan untuk interval waktu dan untuk menonaktifkan fitur tersebut sepenuhnya.

Manually Pairing the Headset and USB Adapter While the headset is powered off, hold down the power button until the headset earcup LEDs starts blinking rapidly. The headset is now in pairing mode. While the USB adapter is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold

Although Cloud Flight S is compatible with PS4, the chat mixer feature is only supported on PC.

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade Green 21% to 60% Solid-fade Yellow 10% to 2

HYPERX CLOUD FLIGHT HEADSET – HSCFFirmware Update Rev. 3116/4103 Part Numbers: HX-HSCF-BK Description: This firmware update contains two different sets of firmware: Rev. 3116 for build AxxLF/BxxLF and Rev. 4103 for CxxLF. The updater will automatically flash the correct firmware based on the build o

Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Headphones (HyperX Cloud Flight 2 Wireless). Set the input device to Microphone (HyperX Cloud Flight 2 Wireless).

Connecting the CloudX Flight 2 with PC Slide the headset wireless mode switch to adapter mode Connect the USB wireless dongle to your device Power ON the headset