Headset

The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W

Charging It is recommended to fully charge your headset before first use.

HyperX Cloud Stinger 3 PS Quick Start Guide

Memasangkan Headset dan Adaptor USB Secara Manual Headset dan adaptor USB secara otomatis dipasangkan saat dikeluarkan dari kotak. Namun, jika pemasangan manual diperlukan, ikuti langkah-langkah di bawah ini untuk memasangkan headset dan adaptor USB. 1. Saat headset dalam keadaan mati, tekan dan tah

NGENUITY should automatically swap back to the hardware audio endpoints when the software and audio engine are not running. Check Windows sound settings and make sure the following devices are assigned correctly to the hardware endpoints: Default playback device: Headphones (HyperX Cloud Alpha 2 Wir

NGENUITY requires administrative permission to install the drivers. With default User Accoount Control settings, you should receive a pop-up for "DriverInstaller". You will need to click "Yes" for the drivers to install. You may also need to adjust User Account Control settings.

Perangkat lunak Cloud Orbit hanya kompatibel dengan sistem operasi Windows.

Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Headphone Driver: Dynamic, 40mm with neodymium magnets Type: Circumaural, closed back Frequency response: 20Hz-20,000Hz Impedance: 16 Ω Sound pressure level: 99dBSPL/mW at 1kHz THD: < 2% Weight: 215g Cable length and type: Headset (1.3m) Connection: Headset - 3.5mm plug (4 pole) Microphone Element E

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis