Cloud Alpha Family

Controls Status LED *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button Hold for 3 seconds to power headset on/off Press to hear battery level voice prompt Mic mute / mic monitoring button Press to toggle mic mute on/off LED On – Mic muted LED

Cloud Alpha Overview A. Headband adjustment slider B. Detachable noise cancellation mic C. Detachable headset cable D. In-line audio control E. PC Extension cable with 3.5mm stereo and mic plugs

A. Status LED B. Power button C. Mic mute / monitoring button D. 3.5mm headset jack E. USB-C charge port F. Microphone poort G. Wireless mode switch H. Multifunction button I. Volume wheel J. Base station K. Base station USB-C port L. 3.5mm line out port M. 3.5mm line in port N. Detachable microphon

Tekan tombol mute mikrofon untuk mengaktifkan/menonaktifkan mute mikrofon: LED menyala: Mikrofon dimatikan LED Mati: Mikrofon aktif

Putar roda volume untuk menaikkan/menurunkan volume. PERINGATAN: Kerusakan pendengaran permanen dapat terjadi jika headset digunakan pada volume tinggi dalam jangka waktu lama.

Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: Audio Tab Basic volume controls Audio equalizer Mic presets Mic effects Spatial Audio Tab Basic spatial audio controls Advanced setting Lights tab Global lights controls Effects library Keys tab *Note: S

Cloud Alpha Quick Start Guide

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "Audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "Ok, Will Do" on the "drivers Installed" prompt. Restart your PC.