Cloud Alpha Family

Cloud Alpha User Manual

Usage (PlayStation™ 4) To use the headset with a PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: Turn on your PS4™ game console. Navigate to the ‘Settings’ Menu and select it. Highlight the ‘Devices’ menu option and select it.

Cloud Alpha Wireless Quick Start Guide

Using with console & mobile Connect the headset to the device’s 3.5mm port with the 3.5mm (4-pole) cable.

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

You can connect it to your PS4 via either 3.5mm directly into the controller, or using the included USB sound card. Please note that the Game/Chat balance feature is Windows exclusive and will not work with PlayStation consoles.

Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 13Hz – 27kHz Impedance: 65 Ω Sound pressure level: 99dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 310g Weight with mic: 321g Cable length: Detachable headset cable (1m) Connection type: Detachab

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis

Performing a hardware reset on the headset will do a soft reset on all the internal hardware. This may be useful if the headset has unusual behavior, such as unresponsive controls. To perform a hardware reset, press and hold the mic mute button and the multifunction button for 5 seconds. The headset

Setting up with PlayStation 4 1. Connect the wireless USB adapter to the PlayStation 4 console. 2. Set Input Device to USB Headset (HyperX Cloud Alpha Wireless) 3. Set Output Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Set Output to Headphones to All Audio 5. Set Volume Control (Headphone