Auriculares

Guía de inicio rápido de Cloud Chat

Especificaciones de los auriculares Cloud Orbit S Controlador: Transductor planar, 100 mm Tipo: Circumaural, espalda cerrada Respuesta en frecuencia: 10 Hz–50 000 Hz Nivel de presión sonora: >120 dB Distorsión armónica total: < 0,1 % (1 kHz, 1 mW) Peso: 368 g Modos Órbita: audio 3D Orbit S: audio 3D

​ A. Mic mute button B. Microphone port C. Volume Wheel D. Detachable Microphone E. Microphone Mute LED F. USB Dongle G. USB-C to USB-A Adapter

Battery Level Status - Press Power Button to check the battery level The Status LED will automatically turn off to conserve battery life. 61%-100% - Solid-fade Green 21%-60% - Solid-fade Yellow 10%-20% - Solid-fade Red

Configuración de auriculares inalámbricos mediante Bluetooth®. Emparejamiento Bluetooth Con los auriculares apagados, mantenga pulsado el botón de encendido durante 5 segundos. El indicador LED parpadeará en rojo y azul. En tu dispositivo con Bluetooth, busca y conéctate a HyperX Cloud MIX. Una vez

Using with PC, Chromebook, or Notebook ​

1. Plug in the wireless dongle and launch NGENUITY 2. Click on the Headset tab 3. Click “Install” on the “Audio Drivers Required” prompt 4. Wait until the drivers are finished installing 5. Click “OK, Will Do” on the “Drivers Installed” prompt 6. Restart your PC

Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Wired Charging: To charge the headset via wired, plug the headset to a USB port with the USB charge cable.