Auriculares

A. Swivel to mute microphone B. Status LED C. Power button D. USB-C charge port E. Volume wheel F. USB wireless adapter G. Wireless pairing pin hole H. Wireless status LED I. USB-C charge cable

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

Cloud III S Wireless Quick Start Guide

Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Microphone Element: Electret condenser micro

Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller * If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox O

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. ​

Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), connect your HyperX Cloud headset to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3. Highlight the ‘Devices’ menu option and select it. 4. Scroll d

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud headset with a mobile device, simply plug the “Y” cable into the 3.5mm audio jack as seen below. (NOTE: Location of the audio jack may vary based on the model and/or brand of mobile device you are using.) The volume of the conversati

Use cable to connect the headset and devices directly with 3.5mm jacks.

Carga de los auriculares Cuando se conecta el cable de carga, el LED indicará el estado. LED de estado LED rojo fijo > Cargando LED apagado > Carga completa El aviso de voz "Batería baja" se reproduce cuando la batería está al 15%. Para desactivar la carga USB, mantenga pulsada la rueda de volumen d