Auriculares

Cloud Core User Manual

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

Slide the wireless mode switch to the Bluetooth symbol. Press and hold both the power button and multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth Pairing". Go to your device's Bluetooth settings and connect to "HyperX CloudX Sti

Connecting with 3.5mm Cable *Requires 4-pole 3.5mm audio cable ​

While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis

Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Cloud Stinger Core +7.1 Quick Start Guide

The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W

Por diseño, Xbox One detecta cuando se conectan unos auriculares para chatear y, en consecuencia, solo reproduce el audio del chat. Lamentablemente, por el momento no existe ninguna solución alternativa.