Cloud Series

Cloud User Manual

Cloud Usage (Correct vs Incorrect) When connecting your HyperX Cloud headset to a device that has a single 3.5mm audio jack, you MUST use the splitter cable (or “Y” cable) to ensure that each jack is connected properly and securely plugged in. Do NOT ignore or leave any audio jacks unplugged as depi

Cloud Silver Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Overview A. Leatherette headband B. Headband adjustment slider C. Leatherette ear cushions D. Detachable noise cancellation mic E. Cable with in line audio control

The Cloud Core Wireless DTS is not compatible with NGENUITY. Any software interaction with the headset will be done through DTS® Sound Unbound®. Please follow the instructions on the included DTS instruction card to enable DTS Headphone:X ®. Please note there is no code to enter for this product; th

Power button Hold button for 3 seconds to power headset on/off Press button once to see the battery level status on the status LED The status LED will automatically turn off after 5 seconds to conserve battery life ​ Charging the Headset It is recommended to fully charge your headset before first us

Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length

Cloud Core 7.1 Quick Start Guide

Usage (Direct Connect) Connect your headset directly to your computer (or other devices) that have both a headset jack and a microphone jack. The headset jack, which has green stripes, plugs into the port signified by a green input or earphones symbol, and the microphone jack, which has pink stripes

Mobile ​ Connecting the Cloud Core 7.1 to mobile