Cloud Series

PC or Mac PC: Control Panel › Sound › Set Default Playback and Recording to “HyperX Virtual Surround Sound” Mac: Apple® Menu › System Preferences › Sound › Set default output and input to “HyperX Virtual Surround Sound” * Virtual 7.1 surround sound effect output as a 2 channel stereo signal to be us

Usage (Xbox® One) To use the HyperX Cloud headset with Xbox® One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox® One controller (pictured below.) Because this adapter has built-in volume controls, you can remove the control box that came with your HyperX Cloud headset

If the headset is connected to the wireless USB adapter, the headset will automatically power off after 20 minutes of no playback audio activity. If the headset is not connected to the wireless USB adapter, the headset will automatically power off after 3 minutes.

Usage (with Control Box) Connect your headset to the control box that has both a headset jack and a microphone jack on it. The headset jack (green stripes) plugs into the green input port on the control box and the microphone jack (pink stripes) plugs into the pink input port on the control box. The

Cloud Core Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud Core headset with a mobile device, plug the 3.5mm jack directly into the headset jack on your phone or tablet. ​

Cloud Core Usage (Xbox One) To use the HyperX Cloud Core headset with Xbox One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox One controller (pictured below). Connect the 3.5mm jack on the headset directly to the Xbox One adapter.

Headphone Driver: Dynamic, 53mm with neodymium magnets Form factor: Over-ear, circumaural, closed-back Frequency response: 10 Hz – 21 kHz Impedance: 60 Ω Sensitivity: 99 dB SPL/mW at 1 kHz T.H.D.: ≤ 1% Frame type: Aluminum Ear cushions: Memory foam Microphone Element: Electret condenser microphone P

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz (earphones) Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB T.H.D: < 2% Power handling capacity: 150mW • Sound coupling to the ear: Circumaural Ambient noise attenuati

Usage (PlayStation® 4) To use the HyperX Cloud Core headset with PlayStation 4 (PS4™), connect the 3.5mm jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4 game console. 2. Navigate to the Settings menu and select it. 3. Highlight the ‘Devices’ menu o

Cloud Core Wireless DTS Overview ​ A. Status LED B. Power Button C. Mic Mute / Mic Monitoring button D. Volume Wheel E. USB-C Charge Port F. Microphone Port G. Detachable Microphone H. USB Adapter I. Wireless Pairing Pin Hole J. Wireless Status LED K. USB-C Charge Cable L. DTS Instruction Card