耳機

Cloud Stinger Core User Manual

Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Alpha Wireless” and click on the Set Default button. 5. Under the Recordi

PlayStation 4 USB 設定 1. 打開耳機電源。 2. 按住麥克風音量旋鈕 2 秒鐘以切換音訊模式。重複此步驟，直到耳機發出語音提示「2 聲道」。 3. 使用 USB Type-C 轉 USB Type-A 連接線將耳機連接至 PlayStation 4 主機。 4. 從PS4主選單中，依序選擇「設定」>「裝置」>「音訊裝置」。 5. 將輸入裝置設定為 USB 耳機（HyperX Cloud Orbit 2Ch）或 USB 耳機（HyperX Cloud Orbit S 2Ch） 6. 將輸出裝置設定為 USB 耳機（HyperX Cloud Orbit 2Ch）或 USB 耳機

HyperX CloudX Chat 快速入門指南

Cloud Flight S LED Status ​ Status Pairing - Flash Green and Red every .5 seconds Searching - Slow breathing Green Battery Level 90%-100% - Solid Green 15%-90% - Blinking Green

Headset Controls Power button Hold the power button for 3 seconds to power on/off the headset. With the headset powered on, short press the power button to cycle through the ear cup LED modes. The supported LED modes are solid (default), breathing, and off. Volume wheel Rotate the volume wheel up or

Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, closed back Frequency response: 13Hz–27,000 Hz Impedance: 65 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 1% Weight: 298g Weight w/ mic: 336g Cable length and type: Detachable headset (1.3m) + PC extension cable (2

Battery Level Status: Press the Power button to check the battery level. The status LED will automatically turn off to conserve battery life. 61%-100% - Solid-fade Green 21%-60% - Solid-fade Yellow 10%-20% - Solid-fade Red

麥克風可以安裝在耳罩的任一側。因此，這款耳機可以戴在左耳和/或右耳上。