耳機

使用 USB 連接線連接 Orbit 耳機時，電池可能無法充電的原因有幾種： 耳機所連接的 USB 連接埠可能供電不足。如果您使用的是 USB 集線器或筆記型電腦的 USB 端口，則可能會發生這種情況。 某些 USB 連接埠在節能狀態（例如睡眠模式）下不供電。 耳機上的 USB 充電設定已關閉—除非耳機斷電，否則透過 USB 連接時電池不會充電。

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

This may be caused by environmental interference around where the USB adapter is plugged in. Below are some tips that may help address this issue: Avoid plugging the dongle into USB hubs near other peripherals. This is especially true when using externally-powered hubs or accessories, as the electri

手動配對耳機和 USB 轉接器 耳機和USB轉接器出廠時已自動配對。但如果需要手動配對，請依照以下步驟將耳機和USB轉接器配對。 1. 在耳關機狀態下，按住電源按鈕，直到耳機狀態指示燈開始快速紅綠交替閃爍。此時耳機已進入配對模式。 2. 插入 USB 轉接器後，使用小工具（例如回形針、SIM 卡托彈出器等）按住針孔內的按鈕，直到 USB 轉接器上的 LED 指示燈快速閃爍。此時 USB 轉接器處於配對模式。 3. 等待耳機指示燈和 USB 轉接器指示燈都常亮。耳機和 USB 轉接器現已配對成功。

Connect the USB cable to the headset and device to charge the headset. Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Using the Headset Swivel to Mute Microphone Power Button Power on/off – Hold the power button for 3 seconds. Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time

Overview A. Swivel to Mute Microphone B. Status LED C. Power Button D. Volume Wheel E. USB Charge Port F. USB Adapter G. Wireless Pairing Pin Hole H. Wireless Status LED I. USB Charge Cable

Plug the headset into the controller using the 3.5mm jack

Cloud II Core Wireless Quick Start Guide

Cloud II 無線使用手冊