耳機

Cloud MIX 2 在 Windows 系統中的設置 設定預設輸出和輸入設備

The Cloud III S Wireless is **not** compatible with Xbox.

Connecting the CloudX Flight 2 with Xbox console Slide the headset wireless mode switch to adapter mode and slide the dongle mode switch to Xbox mode Connect the USB wireless dongle using the USB-C to USB-A adapter Power ON the headset

Cloud Core Usage (Xbox One) To use the HyperX Cloud Core headset with Xbox One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox One controller (pictured below). Connect the 3.5mm jack on the headset directly to the Xbox One adapter.

雲混合規格 耳機 驅動單元：客製化動圈式，40毫米，釹磁鐵 類型：全罩式，封閉式後背 頻率響應：10Hz–40,000Hz 阻抗：40 Ω 聲壓級：1kHz 時為 100dBSPL/mW；總諧波失真：< 2% 重量：260公克 含麥克風重量：275公克 電纜長度： 可拆式耳機線：1.3米 電腦延長線：2米 USB充電線：0.5米 連接類型： 可拆式耳機線：3.5mm插頭（4極） 電腦延長線：3.5mm立體聲與麥克風插頭 吊桿式麥克風 元件：駐極體電容式麥克風 極座標模式：降噪 頻率響應：50Hz-18,000 Hz 靈敏度：-42dBV（0dB=1V/Pa，1kHz） 內建麥克風 元件：駐極體

Xbox One™ or PS4™ ​ Connecting the Cloud Core 7.1 to consoles

Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud headset with a mobile device, simply plug the “Y” cable into the 3.5mm audio jack as seen below. (NOTE: Location of the audio jack may vary based on the model and/or brand of mobile device you are using.) The volume of the conversati

Cloud MIX 2 恢復原廠設置 ​ ​ 同時按住[電源]和[多功能]按鈕10秒鐘即可啟動恢復出廠設定。電源狀態指示燈將開始紅白交替閃爍。

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20