Cloud II Series

Articles - Category Page

  • 韌體更新後,Cloud II Wireless 無法正常運作。

    您可能只需要將耳機與 USB 轉接器重新配對即可。 ​ 請按照以下步驟將它們配對。 1. 在耳關機狀態下,按住電源按鈕,直到耳機狀態指示燈開始快速紅綠交替閃爍。此時耳機已進入配對模式。 2. 插入 USB 轉接器後,使用小工具(例如回形針、SIM 卡托彈出器等)按住 USB 轉接器針孔內的按鈕,直到轉接器上的 LED 指示燈快速閃爍。此時 USB 轉接器處於配對模式。 3. 將耳機靠近接收器。等待耳機指示燈和 USB 接收器指示燈都常亮。耳機和 USB 接收器現已配對成功。

    Knowledge Base Article

  • Cloud II 無線快速入門指南

    Cloud II 無線快速入門指南

    Knowledge Base Article

  • Cloud II 無線電池電量指示器

    Cloud II 無線 LED 指示燈 ​

    Knowledge Base Article

  • Cloud II Specifications

    Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

    Knowledge Base Article

  • (HP OMEN) Cloud II Core Wireless User Manual

    (HP OMEN) Cloud II Core Wireless User Manual

    Knowledge Base Article

  • (HP OMEN) Cloud II Core Wireless Usage with System

    *Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Usage with HP OMEN System 1. Power on the HP OMEN system 2. Power on the headset. The headset will automatically connect to the system.

    Knowledge Base Article

  • Cloud II with USB Control Box Setup

    Usage (with Control Box) Connect the headset’s 3.5mm audio jack to the input jack on the USB control box. The USB control box then connects to a computer using the USB connector on the end of the control box. To ensure that HyperX Cloud II is the default audio device, you must follow these instructi

    Knowledge Base Article

  • Cloud II Core Wireless Power Button and LED status

    Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status - Press the button to see the battery level status on the status LED. *The status LED will automatically turn off to conserve battery life. *Battery level indication

    Knowledge Base Article

  • Cloud II Wireless DTS Playstation 5 Setup

    Setting up with PlayStation 5 1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud II Wireless) 4. Under Audio Output, set the following: Output Device: U

    Knowledge Base Article

  • Cloud II 無線規範

    Cloud II 無線耳機規格 耳機 驅動單元:動圈式,53毫米,釹磁鐵 類型:全罩式,封閉式後背 頻率響應:15Hz–20kHz 阻抗:60 Ω 聲壓級:1kHz 時為 104dBSPL/mW;總諧波失真:≤ 1% 重量:300公克 含麥克風重量:309克 線材長度與種類:USB充電線(0.5公尺) 麥克風 元件:駐極體電容式麥克風 極性模式:雙向,降噪 頻率響應:50Hz-6.8kHz 靈敏度:-20dBV(1V/Pa,1kHz) 電池續航力* 30小時 無線範圍** 2.4 GHz 頻率,最遠可達 20 米 *測試時耳機音量設定為50%。電池續航時間因使用情況而異。 **無線傳輸範圍可能

    Knowledge Base Article