Cloud Family

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "OK, Will DO" on the "drivers Installed" prompt. Restart your PC.

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz (earphones) Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB T.H.D: < 2% Power handling capacity: 150mW • Sound coupling to the ear: Circumaural Ambient noise attenuati

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud II headset with a mobile device, unplug the USB control box and plug the 3.5mm headset jack directly into the audio jack on your phone or tablet.

Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge cable (0.5m) Microphone Element: Electret c

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc

Status LED ​

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

Cloud II Core Wireless Quick Start Guide (HP OMEN)

Cloud Mini Wireless Charging ​ It is recommended to fully charge the Headset before the first use. The headset will take approximately 2.5 hours to fully charge from low battery.

Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), unplug the headset jack from the USB control box and connect audio jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3.