Cloud III Series

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”

The DTS license provided with the Cloud III is not able to be used on Xbox, only PC. The license is accessed on PC by plugging in the Cloud III via the included USB adapter. As the USB adapter does not function on Xbox due to system limitations, the license is also not able to be used on Xbox to acc

Slide the mode switch to the Bluetooth icon. Press and hold the Power and Multifunction buttons for 2 seconds to enter Bluetooth pairing mode. Pairing mode is active when the LED blinks blue and the voice prompts says "Bluetooth pairing". ​ ​Go to your device Bluetooth settings, search, and connect

Cloud III Wireless User Manual

Status LED ​

A. Mic mute / mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Multifunction button G. Volume wheel H. Mode switch I. Removeable earcup plates J. Detachable microphone K. Microphone mute LED L. USB wireless dongle M. Dongle status LED N. Pairing pin hole

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He