HyperX 支持中心
知识库文章
知识库文章
Cloud II Core Wireless Quick Start Guide
知识库文章
•
Cloud II Core Wireless
Cloud II Core Wireless Setting up with PlayStation 5 1. Connect the wireless dongle to your device. 2. Power on the headset 3. Go to the home page and select Settings > Sound 4. Microphone: Input Device: USB Headset "HyperX Cloud II Core Wireless" 5. Audio Output: Output Device: USB Headset "HyperX
知识库文章
•
Cloud II Core Wireless
Cloud II Core Wireless Quick Start Guide (HP OMEN)
知识库文章
•
Cloud II Core Wireless
Cloud II 无线控制器 状态指示灯 电源/7.1环绕声按钮 按住 3 秒钟即可打开/关闭耳机电源 按下可切换 7.1 环绕声* 的开/关状态 *虚拟 7.1 环绕声输出为 2 声道立体声信号,可与立体声耳机配合使用。 麦克风静音/麦克风监听按钮 按下可切换麦克风静音开关 LED指示灯亮起 – 麦克风已静音 LED 指示灯熄灭 – 麦克风已激活 按住 3 秒钟可切换麦克风监听的开启/关闭状态 音量轮 上下滑动调节音量 警告:长时间以高音量使用耳机可能会造成永久性听力损伤。
知识库文章
•
Cloud II Wireless
*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Usage with HP OMEN System 1. Power on the HP OMEN system 2. Power on the headset. The headset will automatically connect to the system.
知识库文章
•
Cloud II Core Wireless
(HP OMEN) Cloud II Core Wireless User Manual
知识库文章
•
Cloud II Core Wireless
Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status - Press the button to see the battery level status on the status LED. *The status LED will automatically turn off to conserve battery life. *Battery level indication
知识库文章
•
Cloud II Core Wireless
Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), unplug the headset jack from the USB control box and connect audio jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3.
知识库文章
•
Cloud II
HYPERX CLOUD II HEADSET - Kingston/KTC Firmware Update Rev. 0010 Part Number: KHX-HSCP-xx Description: We have improved the firmware for the HyperX Cloud II USB sound card to enable PS4 compatibility. For information related to the Firmware improvements, please see the "Release Notes” located below.
知识库文章
•
Cloud II
您可能只需要将耳机与 USB 适配器重新配对即可。 按照以下步骤将它们配对。 1. 在耳机关机状态下,按住电源按钮,直到耳机状态指示灯开始快速红绿交替闪烁。此时耳机已进入配对模式。 2. 插入 USB 适配器后,使用小工具(例如回形针、SIM 卡托弹出器等)按住 USB 适配器针孔内的按钮,直到适配器上的 LED 指示灯快速闪烁。此时 USB 适配器处于配对模式。 3. 将耳机靠近接收器。等待耳机指示灯和 USB 接收器指示灯都常亮。耳机和 USB 接收器现已配对成功。
知识库文章
•
Cloud II Wireless