Cloud Alpha Family

Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

按下麦克风静音按钮即可打开/关闭麦克风静音功能： LED 指示灯亮起：麦克风已静音 LED 灯熄灭：麦克风已激活

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "Audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "Ok, Will Do" on the "drivers Installed" prompt. Restart your PC.

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: Audio Tab Basic volume controls Audio equalizer Mic presets Mic effects Spatial Audio Tab Basic spatial audio controls Advanced setting Lights tab Global lights controls Effects library Keys tab *Note: S

Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, closed back Frequency response: 13Hz–27,000 Hz Impedance: 65 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 1% Weight: 298g Weight w/ mic: 336g Cable length and type: Detachable headset (1.3m) + PC extension cable (2

Usage (PC) To connect the headset to your computer (or another device) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs into

Cloud Alpha Quick Start Guide

1. Slide the headset wireless mode switch to the WiFi symbol and the base station mode switch to "HEADSET". 2. Power ON the headset.

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

Usage (PlayStation™ 4) To use the headset with a PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: Turn on your PS4™ game console. Navigate to the ‘Settings’ Menu and select it. Highlight the ‘Devices’ menu option and select it.