Cloud Alpha Family

You can connect it to your PS4 via either 3.5mm directly into the controller, or using the included USB sound card. Please note that the Game/Chat balance feature is Windows exclusive and will not work with PlayStation consoles.

Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 13Hz – 27kHz Impedance: 65 Ω Sound pressure level: 99dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 310g Weight with mic: 321g Cable length: Detachable headset cable (1m) Connection type: Detachab

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis

Performing a hardware reset on the headset will do a soft reset on all the internal hardware. This may be useful if the headset has unusual behavior, such as unresponsive controls. To perform a hardware reset, press and hold the mic mute button and the multifunction button for 5 seconds. The headset

Setting up with PlayStation 4 1. Connect the wireless USB adapter to the PlayStation 4 console. 2. Set Input Device to USB Headset (HyperX Cloud Alpha Wireless) 3. Set Output Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Set Output to Headphones to All Audio 5. Set Volume Control (Headphone

将 3.5 毫米插头插入 USB 加密狗的母头，将 USB 加密狗的公头插入系统（PC）。

It is recommended to fully charge your headset before first use. Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

A. Line out / headset mode switch: Switch audio between 3.5mm line out or headset. B. Volume wheel: Rotate wheel to adjust playback volume level. C. Mic mute: Press button to toggle mic mute on / off. D. Buttons Mic gain: Rotate wheel to adjust mic gain level. Game / Chat mix: Rotate wheel to adjust

Discord Setup 1.Under Discord settings, select Voice & Video. 2. Under Voice Settings, select Input Device to Microphone (HyperX Cloud Alpha S Chat). 3. Select Output Device to Headset Earphone (HyperX Cloud Alpha S Chat).

Use cable to connect the headset and devices directly with 3.5mm jacks.