Kulaklık

Cloud Chat Hızlı Başlangıç Kılavuzu

Cloud Orbit S Teknik Özellikleri Kulaklık Sürücü: Düzlemsel dönüştürücü, 100 mm Tip: Kulak üstü, Kapalı arka Frekans tepkisi: 10 Hz–50.000 Hz Ses basınç seviyesi: >120 dB Toplam harmonik bozulma: < %0,1 (1 kHz, 1 mW) Ağırlık: 368g Modlar Orbit: 3D ses Orbit S: Baş takibi özellikli 3D ses Kablo uzunl

​ A. Mic mute button B. Microphone port C. Volume Wheel D. Detachable Microphone E. Microphone Mute LED F. USB Dongle G. USB-C to USB-A Adapter

Battery Level Status - Press Power Button to check the battery level The Status LED will automatically turn off to conserve battery life. 61%-100% - Solid-fade Green 21%-60% - Solid-fade Yellow 10%-20% - Solid-fade Red

Bluetooth® aracılığıyla kablosuz kulaklık kurulumu Bluetooth eşleştirme Kulaklık kapalıyken, güç düğmesini 5 saniye basılı tutun. LED göstergesi kırmızı ve mavi yanıp sönecektir. Bluetooth özellikli cihazınızda HyperX Cloud MIX'i arayın ve bağlanın. Bağlandıktan sonra, gösterge LED'i her 5 saniyede

Using with PC, Chromebook, or Notebook ​

1. Plug in the wireless dongle and launch NGENUITY 2. Click on the Headset tab 3. Click “Install” on the “Audio Drivers Required” prompt 4. Wait until the drivers are finished installing 5. Click “OK, Will Do” on the “Drivers Installed” prompt 6. Restart your PC

Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Wired Charging: To charge the headset via wired, plug the headset to a USB port with the USB charge cable.