Cloud Stinger Family

Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Microphone Element: Electret condenser micro

Plug the headset into the controller via 3.5mm jack

The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W

Single Press - Play / Pause / Answer Call Double Press - Skip Track / End Call / Reject Call Triple Press - Previous Track Long Press (2S) - Activate Voice Assistant *Button functionality can vary between devices and apps.

Cloud Stinger 2 Wireless Quick Start Guide

Cloud Stinger 2 PC or Laptop Setup ​

1. Connect the wireless adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Stinger 2 Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “H

Cloud Stinger Core 7.1 Overview ​ A. Swivel to mute microphone B. Volume Wheel C. 3.5mm (4-pole) plug D. USB Adapter

Slide the wireless mode switch to the Bluetooth symbol. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search and connect to "HyperX CloudX Stinger 3 Wireless".

​ Status LED Status Battery Level LED Searching: Slow breathing green Connected: 90% - 100% Solid green for 5s 10% - 90% Blinking green for 10s < 10% Blinking red for 10s *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button • Hold for 3 seconds