Pulsefire Haste Family

Turn the mouse upside down.Gently slide a plastic pry tool under the edge of a skate.Slowly lift and peel the skate away from the mouse.Repeat for all skates.Remove all leftover adhesive residue and debris. (you may need to use rubbing alcohol and a microfiber cloth to get it completely clean).Allow

Mouse Factory Reset If you are experiencing any issue with the mouse you can perform a factory reset. You will lose your custom LED profile and DPI presets by doing this. ​ Press and hold the DPI button + Mouse Wheel click for 5 to10 seconds ​

Pulsefire Haste 2 Wireless Pairing Tool

To perform a Factory Reset of the Pulsefire Haste 2 Pro: Hold DPI button and Scroll wheel for 5 seconds. The scroll wheel will flash red 2 times momentarily and disappear once reset has completed. This will reset the following on the mouse: DPI to 800 and 4 profiles Polling Rate to 1000Hz on 2.4GHz

Pulsefire Haste 2 Pro Firmware Update Exit NGENUITY from the System Task Bar on the bottom left corner (Right Click -> Exit). If NGENUITY is not installed nor running on your system, proceed to Step 2. Connect the Mouse to the PC via the USB cable. Run the Mouse updater file and press Update. Press

Switch the mouse to 2.4G power mode Connect the wireless desktop dongle to a PC or game console using the included USB cable. For optimal placement, keep the wireless desktop dongle within 20cm of the mouse.

Pulsefire Haste 2 Wireless User Manual

Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode.

Pulsefire Haste 2 Quick Start Guide

Press and hold the DPI button + Mouse wheel button simultaneously until the mouse LED flashes red ​ Factory Settings DPI Level: 400 / 800 / 1600 / 3200 Polling rate: 1000Hz RGB lighting: Cycle effect Button Assignments