Pulsefire Haste Family

Pulsefire Haste Itachi Edition Specifications Specifications Shape: Symmetrical Sensor: Pixart PAW3335 Resolution: Up to 16000 DPI DPI Presets: 400 / 800 / 1600 / 3200 DPI Speed: 450 IPS Acceleration: 40G Buttons: 6 Left / Right buttons switches: TTC Golden Micro Dustproof Switch Left / Right button

Pulsefire Haste DPI Settings

To reset the mouse's Instant Pair pairing table: Clear the Laptop's pairing table first. On the compatible OMEN laptop it's paired to via Instant Pair, go into NGENUITY. Go into NGENUITY Settings. Find the mouse in the device list, and click Forget Device. Clear the mouse's pairing table: Also insid

This specific process will only work if the mouse and the OMEN Laptop have never paired with each other. Additionally, the firmware of the mouse must be version 1121 or higher. Move the mouse close to the compatible OMEN Laptop, within 20cm or less. The module the mouse needs to pair with is located

2.4G Wireless Mode Switch the mouse to 2.4G power mode. Connect the USB wireless dongle to the extension adapter. Connect the extension adapter to a PC or game console using the included USB cable. For optimal placement, keep the wireless adapter within 20cm of the mouse. ​​ Bluetooth Mode (NGENUITY

What's the difference of battery life when using 1000Hz and 4000Hz Polling Rate? 1000Hz: Up to 90 Hours 4000Hz: Up to 30 Hours This was tested continuously while turning off all the lighting and paired wirelessly. Your experience will vary based on your usage!

To force the mouse to connect via Instant Pair to a compatible system: Move the mouse power switch to “OFF”. Hold the “Back Button” on the mouse. While holding the Back Button, move power switch to “2.4G”. The mouse will blink Orange four times when successfully connected to the compatible system vi

Wireless Mode For optimal performance, please use the provided wireless adapter and keep within 20cm of the mouse. These instructions apply to Computers and Game Consoles (PS4, PS5, Xbox One, Xbox Series X|S). 1. Connect the wireless receiver to the wireless adapter. 2. Connect the USB-C connector t

Pulsefire Haste Wireless includes grip tape that can be used for added control and comfort, if desired. The grip tape will cover the hex cutout holes on the left and right mouse buttons. 1. Attach the button grip tape for the left [1] and right [2] mouse buttons, with the pointed end facing the forw

Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty. ​ Switch power mode to "OFF". Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 Security screws below. Gently separate and lift the top shell from the bot