Cloud III Series

Articles - Category Page

  • Cloud III S Wireless Controls

    Status LED Status Adapter Mode Bluetooth Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking blue Connected Solid-fade white for 5 seconds Solid-fade blue for 5 seconds Power Button Power on / off - Hold button for 2 seconds to power headset on / off. Battery level

    Knowledge Base Article

  • Cloud III S Wireless - Voice / Tone Notifications

    In NGENUITY software, the headset can be set to prioritize voice notifications or tone notifications. If voice prompts are set to off, the headset will switch to tones for the following notifications: Power on / off Adapter connected / disconnected Bluetooth connected / disconnected Volume at minimu

    Knowledge Base Article

  • Cloud III Wireless User Manual

    Cloud III Wireless User Manual

    Knowledge Base Article

  • Cloud III Wireless Status LED

    Status LED ​

    Knowledge Base Article

  • Cloud III Wireless Setting up with PlayStation 5

    Setting up with PlayStation 5 Go to the home page and select Settings > Sound Microphone Input Device: USB Headset “HyperX Cloud III Wireless” Audio Output Output Device: USB Headset “HyperX Cloud III Wireless” Output to Headphones: All Audio Under volume, set headphones slider to maximum level

    Knowledge Base Article

  • Cloud III Wireless Overview

    A. Mic mute/mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Volume wheel G. Detachable microphone H. Microphone mute LED I. USB wireless dongle J. Dongle status LED K. Pairing pin hole L. USB-C to USB-A adapter M. USB charge cable

    Knowledge Base Article

  • Cloud III S Wireless - PlayStation 5 - USB Adapter Mode (2.4GHz)

    Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

    Knowledge Base Article

  • Cloud III S Wireless - Pairing to Wireless USB Adapter (Dongle)

    While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

    Knowledge Base Article

  • Cloud III DTS not available on Xbox

    The DTS license provided with the Cloud III is not able to be used on Xbox, only PC. The license is accessed on PC by plugging in the Cloud III via the included USB adapter. As the USB adapter does not function on Xbox due to system limitations, the license is also not able to be used on Xbox to acc

    Knowledge Base Article

  • Cloud III Quick Start Guide

    Cloud III Quick Start Guide

    Knowledge Base Article