Cloud III Wireless

Setting up with PlayStation 5 Go to the home page and select Settings > Sound Microphone Input Device: USB Headset “HyperX Cloud III Wireless” Audio Output Output Device: USB Headset “HyperX Cloud III Wireless” Output to Headphones: All Audio Under volume, set headphones slider to maximum level

A. Mic mute/mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Volume wheel G. Detachable microphone H. Microphone mute LED I. USB wireless dongle J. Dongle status LED K. Pairing pin hole L. USB-C to USB-A adapter M. USB charge cable

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt

Cloud III Wireless Quick Start Guide

Charging It is recommended to fully charge your headset before first use.

Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status – Press the button to see the battery level status on the status LED. The status LED will automatically turn off to conserve battery life.