Центр поддержки HyperX
Статьи базы знаний
Статьи базы знаний
Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs
Knowledge Base Article
•
Cloud
The DTS license provided with the Cloud III is not able to be used on Xbox, only PC. The license is accessed on PC by plugging in the Cloud III via the included USB adapter. As the USB adapter does not function on Xbox due to system limitations, the license is also not able to be used on Xbox to acc
Knowledge Base Article
•
Cloud III
In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt
Knowledge Base Article
•
Cloud III Wireless
If the headset is connected to the wireless USB adapter, the headset will automatically power off after 20 minutes of no playback audio activity. If the headset is not connected to the wireless USB adapter, the headset will automatically power off after 3 minutes.
Knowledge Base Article
•
Cloud Core Wireless DTS
Connecting with 3.5mm Cable *Requires 4-pole 3.5mm audio cable
Knowledge Base Article
•
Cloud Mini Wireless
Volume Wheel Scroll up and down to adjust the volume level.
Knowledge Base Article
•
Cloud III Wireless
Cloud Core 7.1 Quick Start Guide
Knowledge Base Article
•
Cloud Core 7.1
Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud headset with a mobile device, simply plug the “Y” cable into the 3.5mm audio jack as seen below. (NOTE: Location of the audio jack may vary based on the model and/or brand of mobile device you are using.) The volume of the conversati
Knowledge Base Article
•
Cloud
Cloud Core Overview A. Leatherette headband w/ HyperX logo B. Aluminium arm to adjust the headband C. Attached cable w/ 3.5mm input jack D. Detachable microphone with adjustable arm and condenser E. Mini 3.5mm jack plug (4 pole) F. PC extension cable
Knowledge Base Article
•
Cloud Core
Технические характеристики беспроводной гарнитуры Cloud II Наушники Динамик: динамический, 53 мм, с неодимовыми магнитами. Тип: Охватывающие уши, закрытого типа Частотная характеристика: 15 Гц–20 кГц Импеданс: 60 Ом Уровень звукового давления: 104 дБ SPL/мВт на частоте 1 кГц. Коэффициент нелинейных
Knowledge Base Article
•
Cloud II Wireless