Cloud II Series

Cloud II Core Wireless Volume Wheel Scroll up and down to adjust the volume level WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Visua

A, Status LED B. Power Button C. Mic mute/ mic monitoring button D. Volume wheel E. USB-C charge port F. Microphone port G. Detachable microphone H. USB wireless dongle I. Dongle pairing pinhole. J. Dongle status LED K. USB-C charge cable

Беспроводной светодиодный индикатор Cloud II ​

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "OK, Will DO" on the "drivers Installed" prompt. Restart your PC.

Usage (with Control Box) Connect the headset’s 3.5mm audio jack to the input jack on the USB control box. The USB control box then connects to a computer using the USB connector on the end of the control box. To ensure that HyperX Cloud II is the default audio device, you must follow these instructi

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud II headset with a mobile device, unplug the USB control box and plug the 3.5mm headset jack directly into the audio jack on your phone or tablet.

Настройка с PlayStation 5 1. Подключите беспроводной USB-адаптер к консоли PlayStation 5. 2. Перейдите на главную страницу и выберите «Настройки» > «Звук». 3. В разделе «Микрофон» установите следующие параметры: Устройство ввода USB-гарнитура (HyperX Cloud II Wireless) 4. В разделе «Аудиовыход» уста

Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge cable (0.5m) Microphone Element: Electret c

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc