Quadcast 2 Series

*HyperX Cloud III Wired Not Included ​

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​ LED Indicators Microphone On - Headset Off = Adjust Microphone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Headset On = Adjust Microphone Monitoring Level

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

QuadCast 2 should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

QuadCast 2 Quick Start Guide

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (NOT include the top LED ring) will flash when the factory reset has been triggered.

QuadCast 2 S Quick Start Guide

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

QuadCast 2 Attaching to Other Arms or Stands QuadCast 2 can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads. ​

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​