QuadCast Family

Hold and turn gently to remove or attach microphone to the shock mount.

QuadCast 2 Attaching to Other Arms or Stands QuadCast 2 can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads. ​

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

​ ​ A. Tap-to-Mute Sensor B. Gain Control Knob C. Polar Pattern Knob D. Headphone Jack E. USB Cable Port F. USB Cable G. Mount Adapter* *Supports both 3/8” and 5/8” thread sizes

QuadCast 2 should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

*HyperX Cloud III Wired Not Included ​

​​ Connect the microphone to a USB port on the PS4 with the included USB cable. To ensure the microphone is configured with the most optimal settings on the PS4, follow the steps below: From the PS4 main menu, go to Settings > Devices > Audio Devices Set Input Device to USB Headset (HyperX QuadCast)

PC From the Sound control panel, on the Playback tab, right-click on Speakers HyperX QuadCast and select Properties. On the Levels tab, adjust the Microphone volume slider to adjust the level of microphone monitoring. macOS Open the Finder app and go to Applications > Utilities > Audio MIDI Setup Cl

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (NOT include the top LED ring) will flash when the factory reset has been triggered.